Rev.04
88/112
8.13 Commands
HMI
Local Com.
ModBus RTU
Remote com:
Modbus RTU
Modbus TCP/IP
IEC 60870-5-103
IEC61850
DNP 3.0 Serie
DNP 3.0 TCP/IP
Open Breaker
✓
✓
✓
Close Breaker
✓
✓
✓
79 Block
✓
✓
✓
79 Unblock
✓
✓
✓
Local Control
✓
✓
-
Remote Control
✓
✓
-
Reset
✓
✓
✓
Reset Thermal Image
✓
✓
✓
Set Counter
(*)
✓
✓
(only Modbus)
(*) Counters have a specific menu in HMI where they can be set.
To carry out commands from the remote communications (ModBus, IEC60870-5-103, IEC61850,
IEC60870-5-104, Modbus or DNP 3.0) the relay must be in Remote control mode.
Operations can be performed from the HMI or from local communications (ModBus), regardless of
whether the relay is in remote control.
8.14 Remote Control
The relay can be set to Remote control or to Local control from the HMI or through local communications
software (SICom) according to the previous table.
If remote control is used, it is recommended to configure a led to display when it is permitted and when
it is not.
8.15 Date/time synchronization
The relay can be synchronized from the HMI or by communications.
Summary of Contents for SIL-A A Series
