FANOX SIL-A A Series, User Manual

Page: 94 / 112

www.fanox.com Rev.04 94/112
24 Vdc: < 4 W
230 Vdc: < 5 W
24 Vac (quiescent): < 8 VA
24 Vac (50% Load): < 10 VA
230 Vac (quiescent): < 13 VA
24 Vac (50% Load): < 15 VA
Burden for binary inputs:
24 Vdc: <20 mW
230 Vdc: <200 mW
24 Vac: <50 mW
230 Vac: < 500 mW
Current measurements
Phase current (IA, IB, IC), neutral (3I0* and IN), positive sequence (I1), negative sequence(I2),
I2/I1, phase second harmonic current (IA-2H, IB-2H and IC-2H), maximum current (Imax) and
thermal image (TI)
Fundamental values (DFT)
Sampling: 32 samples/cycle
±2% precision in a band covering ±20% of nominal current and ±4% or ± 5 mA in the rest of the
range
Saturation limit: 30 times rated current
Communications
Local port (micro USB): Modbus RTU
1 RS485 Port: IEC60870-5-103, Modbus RTU or DNP3.0 Serial (selectable by general settings).
(*)
1 RS485 Port: IEC60870-5-103, Modbus RTU or DNP3.0 Serial (selectable by general settings)
+ 1 RJ45 Port: Modbus TCP/IP, DNP3.0 TCP/IP or IEC60870-5-104 Serial (selectable by
general settings) (*)
1 RS485 Port: IEC60870-5-103, Modbus RTU or DNP3.0 Serial (selectable by general settings)
+ 1 RJ45 Port: IEC61850. (*)
Power supply
24-230 Vdc / Vac -20%/+10%
Environmental conditions
Operating temperature: -40 to 70ºC
Storage temperature: -40 to 80 ºC
Relative humidity: 95%
Transformers
Measurement 3 or 4 CT /5 or /1 (depending on model)
Mechanical characteristics
Metallic box
Panel mounted
Height x Width: 177 x 107 (mm)
Depth: 122.1 mm
IP-54
(*) Optional depending on model