Rev.04
103/112
10.6 Menus
10.6.1 Standby mode screen
The default screen shows the device model and the currents in phase A, phase B, phase C, and
Neutral. Press
‘
OK
’
to select a menu: measurements, states, general settings, settings group,
alarms panel, events (SER), fault recorder (DFR), Load Data Profiling (LDP), counters,
commands and date. If the HMI is left in any state, it will return to the default screen after 5
minutes without any key being pressed.
SILA000C6F22AD
0.00 0.00 0.00 0.00
C
myIED
0.00 0.00 0.00 0.00
If any error is detected by the self-diagnosis, an error message appears in the second line (instead
of the currents) on the main screen, which can show any of the following information: (see inside
self-diagnosis section).
•
MEASUREMENT ERROR
•
EEPROM ERROR
•
EVENTS ERROR
10.6.2 Last Trip screen
When a trip occurs, the default screen alternates with the last trip screen, showing the cause of
the trip and the time and date of its occurrence.
Even if auxiliary power is lost, when the SIL-A regains power, it will retain information on the last
trip. The last trip screen will only disappear when the
‘
RESET
’
button is pressed and held down.
Trip 50-1
13/01/19 13:51:44825
Summary of Contents for SIL-A A Series
