
Model 415C & 415SGS Instruction Manual
D01669102
April 2019, Revision A
32
Figure 6-13 Software Screenshot
6.9.6
Customer Data
The customer button allows the user to input a customer name for the test being
performed. It’s no different than a sample property and can be added and deleted
from the test setup.
6.9.7
Save Test
Once the user has finished selecting temperature and pressure ramp profiles the last
step is to push SAVE TEST. A pop-up appears and requires the user to select a test
name. This will be the test file name and will be stored in the tests folder located on
the C drive. An example is shown. Choose a descriptive test name and select save.
Once you have performed this action the software is ready and programmed for that
specific test. The next action would be to start test. If a test setup is not performed
prior to starting a test, the previous test file will continue to be written to. It is not
automatic for the machine to know to start a new test file without user input.
6.10 Start Test
Once your instrument is properly configured and a test has been entered in the
TEST SETUP section. You may begin testing by selecting the START TEST
button from the main menu.