29
6.3 Tuning menu
The tuning menu is shown on the tuning display on the Fanatec Steering Wheels
after activating the tuning menu by pressing the tuning menu button (see chap-
ter ‘Hotkeys’ of this user manual). To navigate through the tuning menu press
up, down, left and right direction at the FunkySwitch
TM
of the Fanatec Steering
Wheel or turn the FunkySwitch
TM
clockwise / counter clockwise. Note: At the
ClubSport Universal Hub you can also use the D-Pad buttons on top of the
Universal Hub so you do not need to attach the separate FunkySwitch
TM
.
6.3.1 S_1 … S_5 (Setups)
Setups range: S_1 ... S_5
Setups default: S_1
The CSL Elite Wheel Base provides five different setups to store your adjust
-
ed values independent from each other. To change the used and active setup
press up or down direction at the FunkySwitch
TM
of the Fanatec Steering Wheel
or turn the FunkySwitch
TM
clockwise / counter clockwise.
6.3.2 SEN (Sensitivity)
SEN range: 009 … 108 Aut
SEN default: Aut
The sensitivity defines the steering angle. If SEN is set to 009 the steering
wheel can only be turned 90° (45° to left and 45° to right side direction from cal
-
ibrated center position). If SEN is set to 108 the steering wheel can be turned
the me- chanical maximum way of 1080° (540° to left and 540° to right side di
-
rection from calibrated center position). If SEN is set to OFF/Aut the sensitivity
is controlled by the PC driver (see chapter PC driver for more details) or even
some games support this feature (e.g. Codemasters F1). To change the used
and active value press up or down direction at the FunkySwitch
TM
of the Fa
-
natec Steering Wheel or turn the FunkySwitch
TM
clockwise / counter clockwise.
Aut means that our driver and games can change this setting automatically by
remote.
6.3.3 FF (Force Feedback)
FF range: OFF 001 … 100
FF default: 100
The Force Feedback defines the maximum strength of the motor when force
feedback effects from software / games are sent to the CSL Elite Wheel Base.
If FF is set to OFF, there will be no force feedback effect executed by the CSL
Elite Wheel Base motor. If FF is set to 001, the motor will execute only 1% of
the maximum motor power. If FF is set to 100, the motor will execute 100% of
the maximum motor power. To change the used and active value press up or
down direction at the FunkySwitch
TM
of the Fanatec Steering Wheel or turn the
FunkySwitch
TM
clockwise / counter clockwise.
