24
If you go to the PC driver page ‘Update’ you will see this window:
In this window you can see the following informations:
•
Currently installed and used PC driver version
•
Currently installed and used firmware version on the CSL Elite Wheel
Base
•
Quick link to the Fanatec homepage www.fanatec.com
Below the shown information there is the button ‘Update CSL Elite Wheel Base
Firmware’. When pressing this button the firmware update process for the CSL
Elite Wheel Base will be started (see more detailed description in chapter ‘Firm
-
ware update procedure’ below in this user manual).
6.1.2 Firmware update procedure
To initiate the firmware update the CSL Elite Wheel Base first has to be be
connected to the PC by USB cable and then it has to be switched to Bootloader
mode. You can switch to Bootloader mode in two different ways:
•
by PC driver, on page ‘Update’ press the button ‘Update CSL Elite Wheel
Base Firmware’ when the CSL Elite Wheel Base is switched ON, see
previous chapter ‘PC driver’
•
by pressing the ON/OFF button “
” on the front plate of the CSL Elite
Wheel Base for about 8 seconds when the CSL Elite Wheel Base is
switched OFF.
