31
wheel into a special direction), spring (pulls the wheel towards the center) and
damper (creates friction). Not every game uses all types of effects and some
games even use only one type to create all different feelings. Using your tuning
menu in the CSW you can increase or reduce these different effects individ
-
ually. To change the used and active value press up or down direction at the
FunkySwitch
TM
of the Fanatec Steering Wheel or turn the FunkySwitch
TM
clock-
wise / counter clockwise.
Note:
If SPR is set to low values or ‘OFF’ the CSL Elite Wheel Base will not be
able to move the attached Steering Wheel to correct center position after cali-
bration run.
Force, spring and damper modifiers cannot be used on Xbox
One since those separated FFB signals are not used in the XBO force
feedback system.
IMPORTANT:
Please do only set these values higher than 100% if the
force feedback effects are clearly not strong enough and weaker in com
-
parison to other games. When the game sends full effects and the wheel
is set to 100% then the device will work on its power limit. Pushing up one
value to a very high number or even raising multiple values will result in
higher load on the motor and increased heat development.
For further information check the FAQ section on our website
www.fanatec.com/support.
6.3.8 FEI (Force Effect Intensity)
FEI range: OFF … 100
FEI default: 050
This parameter adjusts the intensity of force effects and can make effects more
smooth: OFF is very smooth and low noise while 100 is very sharp and direct.
Tuning this parameter can improve the feeling of the wheel depending on the
game. This can be helpful to reduce the noise level especially for bases assem-
bled to tables or rigs.
