17
5.9.1 USB
The USB port is used to connect the CSL Elite Wheel Base to the PC or Xbox
One.
IMPORTANT:
Use only the USB cable with the straight plug which is
packaged with your CSL Elite Wheel Base to avoid damages on the CSL
Elite Wheel Base electronics!
5.9.2 SHIFTER1
The SHIFTER1 port is used to connect H-pattern shifters to the CSL Elite Wheel
Base, e.g. the ClubSport Shifter (CSS) or the ClubSport Shifter SQ (CSS SQ)
in H-pattern mode. Also sequential shifters can be connected to this port and
will be detected correctly. Note: Sequential shifters connected to this port can
be mapped identically to the shifter paddles at the Fanatec Steering Wheels
like the BMW M3 GT2, the Formula Black or Formula Carbon, the Porsche 918
RSR or the Universal Hub with assembled shifter paddle boxes by PC driver
settings (see chapter ‘PC driver’ of this user manual).
5.9.3 SHIFTER2
The SHIFTER2 port is used to connect sequential shifters (SQ) to the CSL Elite
Wheel Base, e.g. the ClubSport Shifter SQ (CSS SQ) in SQ mode or the Club
-
Sport Static Shifter Paddles (CS SSP). Note: Sequential shifters connected to
this port can be mapped identically to the shifter paddles at the Fanatec Steer
-
ing Wheels like the BMW M3 GT2, the Formula Black or Formula Carbon, the
Porsche 918 RSR or the Universal Hub with assembled shifter paddle boxes
by PC driver settings (see chapter ‘PC driver’ of this user manual).
Attention:
H-pattern shifters will not work on SHIFTER2 port!
5.9.4 PEDAL
The PEDAL port is used to connect pedals to the CSL Elite Wheel Base, e.g.
the ClubSport Pedals (CSP), the CSR Pedals (CSR P) or the CSR Elite Pedals
(CSR EP).
5.9.5 HANDBRAKE
The HANDBRAKE port is used to connect the ClubSport Handbrake (CS HB)
to the CSL Elite Wheel Base.
