27
When the update is done the CSL
Elite Wheel Base will restart automat-
ically after firmware update is com
-
pletely finished as shown on the right
hand side:
The CSL Elite Wheel Base switches
off and automatically on again and
then will execute the calibration run.
IMPORTANT:
Do not touch the
attached Steering Wheel while the
CSL Elite Wheel Base restarts and
performs the initial calibration run
to avoid injuries and/or miscalibra-
tion!
IMPORTANT:
The CSL Elite Wheel Base is secured by firmware and
by driver so that usually it is not possible to install wrong firmwares on
the CSL Elite Wheel Base! Do not try to force installation of any wrong
firmware to the CSL Elite Wheel Base to avoid damages.
IMPORTANT:
After firmware update the center position of the CSL
Elite Wheel Base has to be manually calibrated again. This is also indi-
cated by the LED display of the steering wheel showing ‘CAL’. This ap-
pearance will be gone after manual calibration of the wheel center. See
chapter ‘Hotkeys’
‘Wheel center calibration’ for more details.
IMPORTANT:
After firmware update the H-pattern shifters connected
to the CSL Elite Wheel Base has to be manually calibrated again. See
chapter ‘Hotkeys’
‘Shifter calibration mode’ for more details.
