37
acknowledge each single position by pressing START (10) / MENU
to get
to the next one.
The following pictures show the instructions on the LED display of the Universal
Hub but are similar on the other Fanatec Steering Wheels:
. . . . . . . . . . . . . . . .
neutral position
. . . . . . . . . . . . . . . . . . . . . . . . . .
rear
. . . . . . . . . . . . . . . . . . . . . . .
1
st
gear
. . . . . . . . . . . . . . . . . . . . . . .
2
nd
gear
. . . . . . . . . . . . . . . . . . . . . . .
3
rd
gear
. . . . . . . . . . . . . . . . . . . . . . .
4
th
gear
. . . . . . . . . . . . . . . . . . . . . . .
5
th
gear
. . . . . . . . . . . . . . . . . . . . . . .
6
th
gear
. . . . . . . . . . . . . . . . . . . . . . .
7
th
gear
If your shifter has no 7th gear just acknowledge it by pressing
START (10)
when the shifter lever is physically in position of 6th gear. After all gears are
calibrated the LED display shows S_1 and the shifter is ready for use.
NOTE:
If you did not intend entering the shifter calibration mode
please simply complete the calibration process without connected shift-
er and moving shifter lever, then leave the shifter calibration mode at the
end of the process. This has no impact on the CSL Elite Wheel Base orig-
inal calibration itself and you can go ahead without shifter.
