24
If you go to the PC* driver
Settings
page, you will see this window:
There are two different slider bars in the section “
Steering Wheel
”:
There are up to two different options in the section, “
Wheel angle / sensitivity
”
depending on the Steering Wheel you have attached to the CSL Elite Wheel
Base+:
•
A Checkbox to disable the LED Center Stripe on your CSL Elite P1
Steering Wheel.
•
An option to change the picture from CSL Elite P1 Steering Wheel to
the CSL P1 Steering Wheel.
•
To change the picture on the Universal Hub for Xbox One to show
the internal wiring.
In the “
Pedals
” section there is only the one checkbox called ‘
Combined ped-
als
’. Activate this checkbox if the game or software uses only one input (I/O) for
brake and throttle pedal signals (negative signal for brake, positive signal for
throttle). This might solve problems especially with older games.
In the “
Gear shifts
” section there is only one checkbox called ‘Map sequen-
tial shifter to the shifter paddles’. Usually shifters connected to the SHIFTER2
port are mapped to different inputs (I/Os) than the shifter paddles on Fanatec
®
steering wheels. If you want to change the mapping so that the inputs for these
shifters are mapped identically to the Fanatec
®
steering wheel shifter paddles,
activate this checkbox. With the H-Shifter Calibration button it’s possible to
force a shifter calibration if you have, for example, a Podium Hub without any
mounted buttons. This works with any other Fanatec Steering Wheel as well.
The Tuning Menu will be explained later in this user manual (
Chapter 6.3
).
*Compatibility with other platforms not tested nor endorsed by Sony Interactive Entertainment Europe.
Summary of Contents for CSL Elite Wheel Base +
Page 1: ...www fanatec com Manual EN...
