background image

10

ASSEMBLY

5.1  Plan your configuration

To operate the CSL Elite Wheel Base+, connect your steering wheel onto the 

base quick release shaft and get started. Connect the CSL Elite Wheel Base+ 

to your PlayStation

®

4 system or other platforms* by using the USB cable.

 

IMPORTANT:

 Use only the supplied USB cable with your CSL Elite 

Wheel Base+. Failure to do this may cause damage to the CSL Elite Wheel 

Base+ or PlayStation

®

4 electronics!

Please check the “5.9 Connections” chapter to see which kind of peripheral 

devices must be connected to which socket on the CSL Elite Wheel Base+. All 

devices have to be connected to the CSL Elite Wheel Base+ before powering 

ON to allow proper detection and operation.
Additional peripheral devices like pedals or shifters are not strictly required 

but will give the user a more similar feeling to driving a race car. We recom-

mend using shifters and pedals from the Fanatec

®

 ClubSport platform like the 

ClubSport Shifter SQ, the ClubSport Static Shifter Paddles or the ClubSport 

Pedals and more. Visit our Webshop at www.fanatec.com for more compatible 

products.

5.2  Mounting the CSL Elite Wheel Base+ using the Table Clamp

Insert the threaded rod with handles into the table clamp.

5

*Compatibility with other platforms not tested nor endorsed by Sony Interactive Entertainment Europe.

Summary of Contents for CSL Elite Wheel Base +



















































Reviews: