background image

22

The indicator bar shows the current steering 

wheel position, the upper box shows the posi-

tion in digits, the lower box shows the position 

as an angle (positive and negative angle re-

lated to the calibrated wheel centre position).
The “

Display test

” button

 

activates a signal flow on the LED display of the at

-

tached Fanatec

®

 steering wheel and activates all LED display segments so you 

can check if all LED display segments work properly.
The “

FFB test

” button starts a force feedback test and activates the motor of 

the CSL Elite Wheel Base+ to check proper functionality.
The “

Wheel Base RevLEDs test

” button starts a signal flow on the LED bar 

on the upper front side of the CSL Elite Wheel Base and activates them to test 

proper functionality of each single LED.
The “

Steering Wheel RevLEDs test

” button starts a signal flow on the LED bar 

on the steering wheel top side and activates them to test proper functionality 

of each single LED. This is only available for steering wheels which have Rev-

LEDs, refer to the product description of the used steering wheel. The CSL Elite 

Steering Wheel has RevLEDs integrated in the rim centre stripe.
The “

Vibration test

” button starts a vibration signal to activate the vibration 

motors inside the Fanatec

®

 steering wheels. This is only available for steering 

wheels which have vibration motors inside, refer to the product description of 

the used steering wheel. Not applicable for the CSL Elite Steering Wheel.

The “

Clutch

”, “

Brake

”, and “

Throttle

” indicators show the 

current activation and position of these single pedals by a 

blue bar moving up and down. Therefore the pedals must be 

connected to the CSL Elite Wheel Base+.

Note:

 

Every pedal lever must be pressed down completely to 

auto-calibrate the lever movement distance each time when 

power resumes.
The “

D-pad

” arrows (up, down, left, right) change their col-

our from black to blue when the corresponding direction is 

pressed on the attached Fanatec

®

 steering wheel.

The “

Rotary  Encoder

”  boxes  flash  blue  when  turning  the 

FunkySwitch

TM 

left or right. Not applicable for the CSL Elite 

Steering Wheel. Not applicable for the CSL Elite Steering 

Wheel P1/P1X.

Summary of Contents for CSL Elite Wheel Base +



















































Reviews: