![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-wheel-base/csl-elite-wheel-base_manual_3343428040.webp)
40
TROUBLESHOOTING
9
The CSL Elite Wheel Base+ must not be modified differently than described in
this manual. Endor® AG expressly prohibits analysis and utilisation of the elec-
tronics, hardware, software and firmware contained in the controller. In case
difficulties occur in connection with utilisation of the CSL Elite Wheel Base+,
please use the following guide for elimination of errors which is available in the
Downloads tab of the product page on
If the CSL Elite Wheel Base+ is not working properly:
Problem description
Solution
After firmware update of the CSL Elite Wheel
Base+ the steering wheel is not properly centred.
After performing a firmware update on the CSL
Elite Wheel Base+ the wheel centre position
must be manually calibrated. See chapter ‘CSL
Racing Wheel Functions’ ‘Firmware and driver
update’ of this manual for more details.
After firmware update of the CSL Elite Wheel
Base+ the H-pattern shifter is not working
properly.
After performing a firmware update on the CSL
Elite Wheel Base+ the H-pattern shifter must
be manually calibrated. See chapter ‘CSL Elite
Wheel Base+ Functions’ ‘Firmware and driver
update’ of this manual for more details.
The driver window does not show the attached
steering wheel.
Make sure that you have updated your CSL Elite
Wheel Base+ to the latest firmware which can be
downloaded from the Downloads section of the
.
Check the pins inside the quick release of
the steering wheel, these must not be bent or
damaged.
Try to use another steering wheel. If this is also
not detected the CSL Elite Wheel Base+ might
be damaged.
Clean only with a dry or slightly damp cloth. Using cleaning solutions may
damage your CSL Elite Wheel Base+.
CLEANING
8
Summary of Contents for CSL Elite Wheel Base +
Page 1: ...www fanatec com Manual EN...