User manual for Operating table SU-14
Page
3
Dear Clients,
Congratulations on choosing the right product, we wish you would find a
lot of satisfaction while operating it.
Please read this manual very carefully as it includes all the vital
information and notes from the producer concerning proper installation
and maintenance of the product as well as its service.
FAMED
Ż
YWIEC Spółka z o.o.
General notes
•
The use, maintenance as well as servicing of this product performed in other ways
than those, which have been stated in this manual is forbidden and may result in
damages, which will encumber the user and which will not be a matter of producer’s
responsibility.
•
When the operation and parameters of the product do not match the description in
item ‘Operation’ in this manual, the use of the product is not allowed and any
defects have to be reported to the producer or the supplier.
•
Every repair of the product must be done by a factory or an authorized service and
recorded on the list of repairs, which is supplied with the guarantee certificate.
Disregarding this requirement will cause the guarantee for the product to be invalid.
•
Before starting any repairs the table must be disconnected from mains.
•
Operation table has been designed for a patient of 200kg of weight.
Notes concerned with safety
The sign shown below says: : "Warning! - Follow the instructions for safe use ".
A label showing this sign is placed on any parts or mechanisms, which may prove
to be harmful to the patient or the personnel if their operation does not comply
with the descriptions found in this Operating Manual.
•
Do not move the table when it is connected to the main power supply. Before
moving the table, remove the power cord from the mains.
•
The table should not be in the place which obstructs its disconnection from the
mains!
•
Throughout surgical procedures table wheels should be blocked.
•
Do not lay patient's torso on the footrest segment.
•
During carrying out angle adjustments or lowering operation table's height,
anyobstacles must be removed from below the table's surface.
•
During changing the position of the table top segment should not extend
belowor between elements of tabletop.
•
Do
not
shift
operation
table's
position
with
installed
orthopedic
attachment,proctology attachment, installed gynecological segment or installed
shoulder operation attachment due to danger of capsizing the table.
