User manual for Operating table SU-14
Page 17
central position of the lever the backrest segment can be operated from the right, from the left and
from behind the backrest segment.
Caution!
If a patient is very heavy, over 90 kg, the angle of backrest segment should be
changed with particular care; one should be prepared that it would be necessary to
use considerable force to move it up and to cushion lowering at the moment of
lever release (drawing 1 and 2, item 9).
3.7
Change of angular position of the footrests
Angular position of the footrest inclination is changed within the range defined in technical data by
rising of the lever (drawing 1, item 11) or pressing the lever (fig.1, item 22) (on the side removable
footrests) or rising or lowering of the footrest segment to the required level. When the pressure is
removed from the lever, the mechanism is locked and the position of the footrest determined.
Change of the angle between the divided footrests, in the range included in technical data, is obtained
by turning of footrest abduction bolt 3-4 turns (fig.1, item.23) and turning the footrest of the desired
angle to the side.
Caution!
When the function is performed, the footrests may collide with the base!
Check the proper clamp of the handle that locked the footrest turning.
3.8
Insert and take out of footrest
Footrest plate (fig. 5, item 1) is fixed by wedges ( fig. 1, item 10) placed on the bottom of the seat
segment by the blockages placed on both sides of the footrest (fig.5, item 2). Before assembling the
footrest to the seat segment it is necessary to pull out and turn both blockades of the footrest about
90º. After that put on wedge sockets of the footrest on wedge plugs of the seat segment and establish
its position by turning blockades of the footrest up back to the starting position. Disassembly of the
footrest relies on pulling out and turning both blockades of the footrest about 90º and pulling out the
footrests of the wedge plugs of the seat segment. Footrest angle change is obtained by a lever (fig.5,
item 3) activating the gas spring mechanism. Pressing of the lever makes possible the change of
angular position of the footrest. Releasing of the lever provokes blocking of the footrest in chosen
position.
Fig. 6
Caution!
Make sure that the footrest is correctly fixed!
