FAME DD-One Simon Philips Owner'S Manual Download Page 52

Page: 52 / 52

Environmental Protection:

Music Store professional GmbH always endeavours to reduce the burden of packaging to a mi-

nimum. The use of environmentally friendly and recyclable materials is always of funda- mental

importance. Please recycle the packaging after use.

Disposal of Packaging

Ensure that paper packaging, plastic material, etc. are recycled separately.

Observe the labels and the corresponding regulations.

Disposal of Batteries

Batteries should not be thrown away! Please dispose of batteries in accor-

dance with of cial regulations.

Disposal of your old device

This device is subject to the WEEE directive (Waste Electrical and Elect- ronic

Equipment) in its currently applicable form. The device must not be disposed of

with normal household waste.

The device should be disposed of by an approved disposal company or your

local waste disposal centre. The regulations valid in your country must be ob-

served!

This device is subject to the WEEE directive (Waste Electrical and Electronic Equipment) in its current-

ly valid version. The device must not be disposed of with normal household waste.

The device is disposed of via an approved disposal company or your local waste disposal centre.

The regulations valid in your country must be observed!

WEEE-Reg.-Nr. DE 41617453

Cleaning:

The ventilation grilles of the unit must be regularly cleaned of impurities, such as dust, etc. Before

cleaning, switch off the unit and disconnect from the mains power grid.

For cleaning, use a lint-free, moistened cloth. Never use alcohol or solvent for cleaning!

Do not open the device. The device does not contain any user-replaceable or serviceable assemblies

and components. In the event of damage, do not put the unit into operation under any circum-

stances. Service work or repairs may only be carried out by quali ed service per- sonnel, especially

in the following cases:

- Objects or liquids have penetrated the device.

- The unit does not operate as usual.

- The unit has been dropped or the housing damaged.

Dokument-ID: MS-

DRU0036414-000

(09/2018)

Summary of Contents for DD-One Simon Philips





















































Search results

Summary of Contents for DD-One Simon Philips

Reviews:

Related manuals for DD-One Simon Philips

Brands by name

Popular brands

FAME DD-One Simon Philips, Owner'S Manual

Search results

Summary of Contents for DD-One Simon Philips

Reviews:

Related manuals for DD-One Simon Philips

Brands by name

Popular brands