Manual FältCom ECII SE Eng
Page 9 of 36
responsibility for possible defects, operational disturbance, accidents etc. caused by lack of
knowledge or carelessness from the user. The same principle is valid for all not approved
changes to the product.
Fält Communications AB reserves the right to make changes in the product for functional or
commercial reasons. The company is not forced to immediately update reference manuals.
5.2 Product
description
The FältCom ECII SE is alarm equipment for the PSTN network with built in duplex speech
communication designed for installation in lifts.
The FältCom ECII SE is a dialing alarm transmission unit with built-in voice communication
function, intended for installation in passenger lifts. When a lift passenger presses the button
for alarm/emergency signal, the lift phone automatically calls up an alarm centre or some
other predefined alarm receiver and indicates where the alarm comes from. At the same time,
voice communication is established and the person in distress can talk to the staff at the
alarm centre, from where help will be dispatched.
5.2.1 Design and function
The user only sees the lift phone as a discreetly designed panel with perforated screen plate
for the loudspeaker and microphone. The lift phone is activated with the standard alarm
button in the lift or, if required, with a separate alarm button. When someone presses the
alarm button for more than 4 seconds, the alarm calling process is activated in the lift phone.
This time delay can easily be programmed to between 2 and 30 seconds.
The lift phone design also facilitates mounting. Loudspeaker, microphone, all the electronics,
the keys for programming and testing, as well as all connection points are integrated in one
single unit. This means quick and easy installation as well high reliability in operation. The lift
phone speaker sound is easily adjusted with a hidden trim pot.
Lift phone FältCom ECII SE
