2: Typical Test
19
Figure 2-3 – Measurment Result display
10.
Select the ‘OK’ button to close the ‘Measurement Result’ pop-up window.
11.
The measurement data is automatically saved to a data file that is stored.
12.
On the user interface, select the ‘Eject’ icon located in the display header. The tube inlet shutter
door will open and the heater tube will be ejected.
13.
Carefully remove the heater by holding it by the end and store it for future reference. The tube
inlet shutter door will close.
Note: The allowable time to remove the tube is one (1) minute. If the tube has not been removed
within this time duration, the tube will automatically be re-inserted into the machine and the
shutter door closed.
14.
The measurement process is now complete.
Note: The measurement process can be interrupted at any time by pressing the ‘Stop’ button located
on the Falex 430 ETR front control panel. This will disable the laser and stop the test (after
operation confirmation on popup display).