2: Typical Test
18
Figure 2-2 – Measurment Information display
6.
Select the ‘Start’ button located at the bottom of the ‘Measurement Information’ display. This will
initiate the measurement process. The measurement test takes approximately 18 minutes to
complete.
7.
The measurement progress can be monitored from the ‘Measurement’ display (figure 2-3) by
referring to the 3D graph, the associated progress bar and the remaining time status.
Figure 2-3 – Measurment display
8.
The ‘Ready/Running’ indicator light on the Falex 430 ETR control panel will be blinking during the
measurement process.
9.
When the measurement process is complete, a ‘Measurement Result’ pass or fail pop-up window
(figure 2-4) will appear on the user interface to let the operator know the test result.