28
11.11 Lock Mode:
Lock Mode is shown on upper left side
of the console.
Lock mode is activated by pressing and
holding Key 1 (mode) and key 4 (heart)
simultaneously.
Lock mode is deactivated by pressing
and holding Key 1 (mode) and key 4
11.12 Clock
Step one:
Press and hold key 2 for 2 seconds,
console display will change from ODO tp
AM/PM in Segment 4.
Step 2:
With the clock displayed press and hold
key 2 for approximately 7 seconds or
until all digits in Segment 4 display
08:88:88.
Step 3:
Using Key 2 select the digits you require
for a 12 hour clock using key 1 to move
the cursoe to the next digit. After the last
digit has been selected move the cuuror
onto AM/PM. Once selected press Key 1
again to exit Clock Setting.
If you make a mistake and require to go
back to an earlier digit you will have to
start the Clock Setting from step 2.
Summary of Contents for Intelligent energy management system
Page 1: ...1 INSTALLATION MANUAL OWNERS GUIDE...
Page 30: ...30 12 WIRING INSTRUCTIONS...
