16
Step Six:
The wireless transmitter can be
fitted pretty much anywhere on
your frame as long as the cable
reaches the area you want to
attach it to.
For best results fit the
transmitter on the seat tube with
the slotted tabs against the
frame. This usually means that
there is minimal frame material
in the way of the transmitted
signal.
Try as much as possible to keep
the cable as straight as possible
with minimal bends or loops.
Step Five:
Re-‐install crank arms according to manufacturers instructions.
Once installed check that the Mag ring is NOT touching with any of the BB
components or crank sensor.
Note: In some instances it is required to manipulate the crank sensor mount
to give correct clearance between the Magnet ring and the crank sensor.
Summary of Contents for Intelligent energy management system
Page 1: ...1 INSTALLATION MANUAL OWNERS GUIDE...
Page 30: ...30 12 WIRING INSTRUCTIONS...
