20
Step Two:
Cut the power cable to correct length for size of the bike.
Note: it is advisable to cut the cable with approximately 10% extra length just
in case you cut it too short or make a mistake fitting the connector.
Step Three:
From the cut end of the power cable remove approximately 25-‐30mm of
outer cable insulation to reveal positive (brown) and negative (blue) power
wires.
Note: you can remove more or less outer insulation as required for your
purposes or preferences.
Summary of Contents for Intelligent energy management system
Page 1: ...1 INSTALLATION MANUAL OWNERS GUIDE...
Page 30: ...30 12 WIRING INSTRUCTIONS...
