background image

 7. Warranty

The manufacturer guarantees correct device functioning. It also undertakes  to repair 

or replace the device if its defects result from material or structural faults. The warranty period 
is 24 months from the purchase date, fulfilling the following conditions:  

Installation   has   been   performed   by   an   authorised   individual,   as   per   manufacturer 
recommendations.

Seals remain intact and no unauthorised structural changes have been made. 

The device has been used in accordance with its intended use as per user manual. 

Damage is not a result of improperly made electrical system or atmospheric phenomena. 

The manufacturer is not liable for damage which occurred as a result of improper use or 
mechanical damage. 

In case of failure, the device must be submitted  for repair with a Warranty Card. Defects 
revealed within the warranty period will be removed free of charge no longer than 14 days after 
accepting the product for repair. Warranty and post-warranty repairs are performed  by the 
manufacturer i.e. FAKRO PP. Sp. z o.o.   

Quality Certificate:

Device

Model............................................................................................................................................

Serial Number...............................................................................................................................

Seller.............................................................................................................................................

Address.........................................................................................................................................

Date of Purchase.............................................................................................................................

...............................................................................................................

Signature (stamp) of installing person 

12.06.01 NC811-GB

14/16

©2012, 

FAKRO

Summary of Contents for ZWP15

















Reviews: