3.6. Restoring default settings in the controller (DEFAULT function)
Restoring default settings of the controller leads to the following information being deleted from its
memory:
•
network, to which SECONDARY controller has been added;
•
devices in the network for PRIMARY controllers;
•
devices associated with pairs of buttons for PRIMARY and SECONDARY controllers.
After performing DEFAULT procedure the SECONDARY controller will be set as PRIMARY.
3.7. Removing SECONDARY controller from the network
Removing this controller from the network consists in restoring default settings with the use of DEFAULT
function.
12.06.01 NC811-GB
10/16
©2012,
FAKRO
Figure 7: Restoring default settings in controller
1
. Within 1.5 sec. press:
- “
In/Ex
” button twice (
1
) and then
- SELECT button (
2
)
once
2
. The controller is signalizing restoring default
settings – alternate flashing of middle and
external LEDs for app. 1-2 sec.
Note!!!
In the new version of the controller, stopping of any procedure is possible by pressing of „IN/EX” buttons. In
older version, it is necessary to wait 10 sec. until the moment of signalling the error by the controller or resetting it by
removing the batteries.
