4.4 Return to default settings of the ZWMA adaptive module (DEFAULT function)
Restoring default settings of the controller leads to the following information being deleted from its
memory:
•
network, to which the module has been added;
•
devices associated with the ZWMA module.
The procedure of restoring default settings is described in
Figure 6
.
4.5 Removing the ZWMA adaptive module from the network
Removing the ZWMA module from the network consists in restoring default settings in this module.
13.11.21 NC825-GB
9/16
©2013,
FAKRO
Figure 6: Restoring default settings in ZWMA controller
Note!!!
In the newer version of a controller, interrupting any procedure is possible by pressing the “IN/EX” button. In the older
version, it is necessary to wait 10 seconds until the error is signalled by the controller or reset it by disconnecting the power
supply.
1
. Within 1.5 sec., press:
- “
In/Ex
” button twice and then
- „
SELECT”
button once.
2
. The controller is signallling that default
settings have been restored – alternate flashing
of internal and external LEDs for app. 2-3 sec.
1
2
x1
lub
x2
