3 Installation of ZWMA module
The ZWMA module should be mounted onto a wall or other permanent element of the building by
means of screws driven into cylindrical plugs inserted into openings drilled in the wall. In order to install the
ZWMA module, it is necessary to:
1. Take off the cover terminal of the casing.
2. Remount casing to the wall using screws.
3. Make all the necessary electric conections.
4. Screw the cover terminal of the casing .
13.11.21 NC825-GB
4/16
©2013,
FAKRO
Figure 2: ZWMA adaptive module casing
mounting
hole
mounting
hole
lower part
of module
casing
upper part
of module
casing
cover
terminal
plug
8cm
4,4cm
12c
m
