5
Figure 2
Figure 1
EndURancE 50F
INTRODUCTION
The Endurance 50F furnace is designed with a software-controlled, patent pending pot cleaning system
that is hands free, which means less daily maintenance. The automatic operation is based on the amount of
fuel fed into the burn pot; the controller also monitors this. Once the set amount has been reached, the unit
will cycle in the cast re-light plate. The fuel now falls on this plate and is ignited by the lower flame. after it
is ignited the pot pusher will push forward and return twice to disperse the ash. When the pot pusher has
returned the second time, the cast re-light plate will retract, dropping the new fire into the cleaned out pot
area. This all happens automatically so the user does not have to monitor as often.
