2
EndURancE 50F
SAFETY INFORMATION
SAFETY INFORMATION
Safety Testing
This furnace has been tested by Intertek Test Laboratories in
accordance with the following standards – 1482/aSTME
1509/ULc S627 covering Room Heater and Mobile Home
installations. cSa B366.1-M91, UL 391-99 covering central/
Supplementary Furnace installation to included canadian
installations. Please refer to label on furnace for safety related
information.
Caution:
The 50F furnace’s exhaust system works with negative
combustion chamber pressure and slightly positive chimney
pressure. Therefore, it is imperative that the air intake and
exhaust system be airtight and installed correctly. do not install
a flue damper in the exhaust vent of this unit. do not connect
this unit to a chimney flue serving another appliance.
Building Permit
contact local building officials to obtain a permit and
information on local installation restrictions and inspection
requirements.
Disclaimer of Warranty
Fahrenheit Technologies Inc. has no control over the
installation of the furnace. Fahrenheit Technologies
Inc. grants no warranty for the installation of the
furnace and assumes no responsibility for any
special, incidental or consequential damages.
SAFETY NOTICE
Please read the entire manual before installing and using your new furnace. Failure
to follow instructions may result in property damage, bodily injury, or even death.
CAUTION:
Failure to follow the instructions in the installation
manual may result in a house fire. Please follow installa-
tion and maintenance instructions.
WARNING:
Burning improper fuel (i.e. charcoal) can result in Car-
bon Monoxide poisoning, which may lead to sickness
or death.
Manufactured By:
526 East 64th Street
Holland, MI 49423
• The 50F is intended for residential interior applications as
a stand-alone furnace, add-on furnace or as an in-room
stove. Many insurance companies prohibit the use of a
solid-fuel furnace as a primary furnace; consult your specific
policy/application.
• Keep a fire extinguisher or water hose close by the furnace
for safety.
• Familiarize yourself with all local building and safety codes
before installation.
• The installation instructions and code requirements must be
followed exactly.
• Prior to installation, have your chimney inspected by a
qualified inspector to make sure it is clean, in good condition
and operating properly.
• Do not allow anyone to operate this furnace that is not familiar
with the proper and safe use of the furnace.
• Create a barrier between the furnace and any area where
children may be playing. never leave children unattended in
the furnace or stove area.
• Wear protective clothing, such as leather hearth gloves and
safety glasses while tending the fire.
FAILURE TO FOLLOW INSTALLATION REqUIREMENTS
WILL vOID ALL WARRANTIES.
