Fagor 9 CFM 90 N, Manual To Installation

Page: 17 / 144

17
2 / INSTALLING YOUR APPLIANCE EN
• ENVIRONMENTAL PROTECTION
— The cooker hood should be placed at a
distance of 65-75cm (26-30inch) from the
cooking surface for the best effect.
See Pic 1 .
— Install the hook on a suitable place once
the installation height is fi xed, and keep it in
line.
See Pic 2.
— Install the extension tube and chimney
on the cooker hood.
See Pic 3.
— Put the cooker hood on the hook. After
adjusting the position, fi x the body with
safty screw.
See Pic 4 .
Pic 1
Pic 2
Pic 3
Pic 4
Pic 5
Note
The two safty vents are positioned on
the back casing, with diameter of 6mm
Note
— Any installation work must be ca-
rried out by a qualifi ed electrician or com-
petent person.
—
Do not connect the ducting system of
the hood to any existing ventilation system
which is being used for any other applian-
ce, such as warmer tube, gas tube, hot
wind tube.
— The angle of the bend of the ventilation
pipe should not be less than 120º; you must
direct the pipe horizontally, or, alternatively,
the pipe should go up from the initial point
and should be led to an outer wall.
— After the installation, make sure that the
cooker hood is level to avoid greasecollec-
tion at on end. See Pic. 5
Right Wrong