Installation manual
CNC 8035
E.
APPENDIX
Summa
ry of PLC inpu
ts an
d
o
u
tputs
(S
OFT
M: V15.3
X
)
(S
OFT
T: V16.3
X
)
·442·
AXIS LOGIC INPUTS.
SPINDLE LOGIC INPUTS.
Axis 1
Axis 2
Axis 3
LIMIT+
M5100
M5150
M5200
Travel limit overrun. Stops the axes and the spindle. Displays
the error.
LIMIT-*
M5101
M5151
M5201
Travel limit overrun. Stops the axes and the spindle. Displays
the error.
DECEL*
M5102
M5152
M5202
Home switch pressed.
INHIBIT*
M5103
M5153
M5203
Inhibits axis movement.
MIRROR*
M5104
M5154
M5204
Applies mirror image.
SWITCH*
M510
M5155
M5205
Swaps commands (axes with 1 drive)
DRO*
M5106
M5156
M5206
DRO axis. (DRO*=1 and SERVOON*=0).
SERVO*ON
M5107
M5157
M5207
Servo signal. (=1) closes the position loop
AXIS+*
M5108
M5158
M5208
Moves the axis in JOG mode. Similar to JOG keys.
AXIS-*
M5109
M5159
M5209
Moves the axis in JOG mode. Similar to JOG keys.
SPENA*
M5110
M5160
M5210
With CAN. Speed enable signal of the drive.
DRENA*
M5111
M5161
M5211
With CAN. Drive enable signal of the drive.
ELIMINA*
M5113
M5163
M5213
It does not display the axis and cancels the feedback alarms.
SMOTOF*
M5114
M5164
M5214
Cancels the SMOTIME filter, a.m.p. SMOTIME (P58).
LIM*OFF
M5115
M5165
M5215
It ignores the software limits.
MANINT*
M5116
M5166
M5216
Activate the additive handwheel in each axis.
Main
LIMIT+S
M5450
Travel limit overrun. Stops the axes and the spindle. Displays the error.
LIMIT -S
M5451
Travel limit overrun. Stops the axes and the spindle. Displays the error.
DECELS
M5452
Home switch pressed.
SPDLEINH
M5453
Outputs a zero command for the spindle.
SPDLEREV
M5454
Reverses the spindle turning direction.
SMOTOFS
M5455
Cancels the SMOTIME filter, s.m.p. SMOTIME (P46).
SERVOSON
M5457
Servo signal. (=1) to move the spindle in closed loop (M19).
GEAR1
M5458
Spindle gear 1 selected.
GEAR2
M5459
Spindle gear 2 selected.
GEAR3
M5460
Spindle gear 3 selected.
GEAR4
M5461
Spindle gear 4 selected.
SPENAS
M5462
With CAN. Speed enable signal of the drive.
DRENAS
M5463
With CAN. Drive enable signal of the drive.
PLCFM19
M5464
Rapid synchronization feedrate, in M19.
M19FEED
R505
Rapid synchronization feedrate, in M19.
PLCCNTL
M5465
Spindle controlled directly by the PLC.
SANALOG
R504
Spindle velocity command. Only for spindle controlled by PLC.
ELIMIS
M5456
The CNC does not display the spindle although it keeps controlling it.
Summary of Contents for 8035-M
