7
Subject to change without notice.
Version5_20200424
Various parameters can be changed to adapt the system to the environ-
ment in which it is installed.
•
Zones – option for placing luminaires into zones that DO NOT af-
fect one another.
•
Light Output – light level settings, max., min. and low level
•
Personality – choice of default settings.
•
Dwell Time – setting the time after last presence
•
Daylight Dimming – setting the daylight dimming
•
Scenes – 7 different scenes can be set.
•
Absence Detection – automatic switch-on when presence is detec-
ted or manual switch-on (touch panel required).
•
Wall Switch Setup – settings for touch panel, zoning, and IR
strength.
•
Simulated Wall Switch – simulated touch panel.
•
Start Up mode – On/Auto or for a certain scene during presence
•
Infrared Transmission – increases or decreases the transmission
strength of a sensor.
•
Sensor Node Settings – option to save settings in the app for use in
other installations.
•
Other Parameters – setting the PIR sensor’s sensitivity, fluores
-
cent lamp burn-in time, etc.
•
Disaster Recovery Mode – all light at full illumination for 90 mi-
nutes. Cannot be cancelled during the 90 minutes.
•
Sensor Node Default Setting – refer to the table below.
Explanation of menu
Factory settings
Full light
100 %
Lowlight level
0 %
Basic light level
10 %
Time after last presence
10 min.
Time at Basic Light Level
10 min.
Basic setting (personality)
Open Floor
Daylight dimming
Not enabled
PIR Sensor sensitivity
High
Fluorescent lamp burn-in time
Not enabled
Zoning (zone)
1
Scene 0 light level (on touch panel)
50 %
Scene 1 light level (on touch panel)
10 %
IR transmitting strength
30 %
Function at first start-up
Auto-sequence first 15 minutes. Test function
Menu from the right
Summary of Contents for e-Sense Organic G3
Page 1: ...e Sense Organic G3...
