19
Subject to change without notice.
Version5_20200424
e-Sense Organic Wall Panel
e-Sense Organic can be controlled manually with a wall panel (Art. no. 86284). The panel is battery-powered and can
easily be placed on a wall or even glass surfaces. Batteries are supplied with the device. The functions are easy to use. The
panel is supplied to work directly with sensors in Zone 1, but can easily be reprogrammed to another zone.
It is important to remember that the panel is normally in Sleep Mode in order to save battery power. When you press
a function, the panel activates and remains active for 5 seconds to allow the device to be reprogrammed, e.g. changing
zones.
Select “Wall Switch Setup” from the app. Press
any button to wake the panel (the top of the panel
flashes blue when the command is sent).
Point the dongle at the panel and select which zone
it will belong to. The panel flashes again to indicate
that the change has been applied.
Test the panel for luminaires in the same zone.
“Transmission Test” is used to determine how far
the IR signal reaches. Press the test button in the
app and the panel will send 30 IR commands (2 per
second for 15 seconds). All sensors receiving the
command will flash 30 times.
If the signal is weak, the sensor will only flash a
few times.
You can increase/decrease the IR signal strength
using “Infrared Power Transmission”. Press the
On button to wake the panel, select signal strength,
and “Save Settings”.
“Simulated Wall Switch”
This function allows you to
simulate how a wall panel
works without one being
available.
Summary of Contents for e-Sense Organic G3
Page 1: ...e Sense Organic G3...
