12
Subject to change without notice.
Version5_20200424
After last presence is detected, a countdown time will
begin in each node individually. The factory setting of this
time is sufficient to not produce annoying phenomena or
cause the luminaires to switch off. This time, and the time
at low level prior to switch-off, can be set in Dwell Time
in the menu. The factory setting is set to 10 minutes for
both of these times (refer to the table for personality as
applicable). Save and relay in Save Settings. A good tip is
to use a default personality and then adjust the functions
in detail.
Setting the time after last presence detected (Dwell time)
Summary of Contents for e-Sense Organic G3
Page 1: ...e Sense Organic G3...
