10
Subject to change without notice.
Version5_20200424
From the Personality tab you can choose from a number of default “personalities” or function libraries. Each personality
is selected for one type of environment and installation. The factory setting works for most environments, but especially
for open-plan office landscapes. By installing the luminaires, then waiting to see how the setting functions, you will be
able to determine which changes need to be made for an optimal installation. Not included is the setting for max. illumi-
nation, this should be done on location.
Point the dongle at a sensor, select the desired
function. Finish with “Save settings”.
If multiple luminaires are to have the same setting,
use the relay function.
An important function in the default settings is how luminaires communicate with each other over distance. “Corridor”
switches on multiple luminaires but at a lower level over distance.
•
Open Floor – open-plan office landscape.
•
Open Floor Saver – office landscape, but with fewer luminaires that switch on fully based in proximity to presence.
•
Super Saver – huge saving potential in an office.
•
Corridor – switches on multiple luminaires in order to illuminate the entire length of the corridor.
•
Closed Office – only switches on a few luminaires in proximity to presence; can be supplemented with extended time
after last presence.
•
Amenities – suitable for rooms with low presence, such as toilets.
•
Store Room – storage rooms, cloakrooms, etc.
•
Breakout – suitable for office meeting spaces.
•
Demo – used to demonstrate the system’s functions, short duration between presence and switch-off.
•
All On Always – lights always on, never switch off.
•
100/50/0 – only a few luminaires switch on in proximity to presence. Greatest possible savings.
•
Ripples – used to visualise how the presence and relay functions work.
•
Wall Wash – illumination at 100% regardless of distance to detected presence.
•
Motion Only – luminaires only react to presence; no IR information is relayed. For demonstrating the presence function.
Pre-programmed settings (personality)
Saving a personality
Description of personalities
Summary of Contents for e-Sense Organic G3
Page 1: ...e Sense Organic G3...
