English
English
!
At the end of the day, turn the machine OFF by turning the main ON/OFF switch (
1
) to position "0".
Daily Switch-On
Turn the main switch (
1
) to position "1".
If the water in the boiler is lower than the
MIN
level, press the boiler fill
button (
6
) and keep pressed until the floating ball reaches
MAX
.
"
Heating
" now begins.
“Before using the machine make sure that:
the main electricity supply ON/OFF switch is ON
The water in the reservoir must be at the maximum level."
Heating phase
During heating, if one of the coffee dispensing switches
(2
) is pressed,
the machine dispenses a coffee at the temperature reached at the
time.
Heating is completed when the boiler gauge indicator (
9
) remains
stable in the green area.
The machine is now ready to dispense coffee, steam and hot water.
To make sure that the dispenser unit and the filter holder (
7
) are at similar
temperatures, turn the coffee dispensing switches (
2
) to position "1" or
"coffee) and let the machine dispense coffee for a few seconds. Then
turn the switch (
2
) to "0" to stop dispensing.
Delivery of the coffee
Remove the filter holder (
7
), empty out any coffee grouts and fill it up with
1 or 2 servings of ground coffee, depending on the filter holder used.
Press the ground coffee in filter down uniformly, using the grinder/doser
presser.
Remove any residues of ground coffee from the filter rim.
Fit and tighten the filter holder (
7
) on the coffee dispenser unit, positioning
the cup (or cups) under the nozzle (or nozzles) of the filter holder (
7
).
Turn the coffee dispensing switch (
2
) on position "1" or "coffee" for
dispensing.
When the required serving is complete, stop dispensing by turning the
switch (
2
) on position "0".
2
7
Other hot beverage
Steam dispensing
Plunge the steam jet pipe (
3
) into the liquid to be heated in a suitable
container and turn the steam adjustment knob (
4
).
When the liquid is hot, stop the flow of steam by turning knob (
4
) the
other way (towards “0”).
Heating milk for frothy coffee (cappuccino)
Use a tall narrow jug and fill it up to about the half-way mark. Then plunge
the steam jet pipe (
3
) into the milk.
Gradually open up the steam tap (
4
) and heat the milk for a few seconds.
When the required amount of froth has been made and the temperature
is sufficiently high, stop the flow of steam by turning knob (
4
) the other
way (towards “0”).
When the steam jet pipe (
3
) is no longer required, clean it thoroughly
with a sponge and a clean cloth.
Dispensing hot water
Position a container under the hot water pipe (
5
) and turn the hot water
dispensing knob (
14
).
When the required amount has been dispensed, stop the flow of hot
waterby turning knob (
14
) the other way (towards “0”).
4
3
14
5
