![background image](http://html1.mh-extra.com/html/faac/s800-enc/s800-enc_instruction-manual_3142631008.webp)
S800 ENC
6
532116 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
3.6 TECHNICAL SPECIFICATIONS
The hydraulic actuator S800 ENC is available in different versions
for
100°
or
180°
leaf opening options and for the
CBAC
or
SBW
type of
motor block.
-
CBAC
(With Opening and Closing Block): when the motor is not
running, resistance to movement is high. The hydraulic RE-
LEASE device is required for manual operation. Electric locks
are not required to hold the opening/closing positions.
-
SBW
(Without Windy Block) suitable for windy areas: when the
motor is not running, resistance to movement is low (the limits of
use in relation to the wind are described in detail in
1
). The
Hydraulic Release device is recommended for manual opera-
tion. Electric locks are required to hold the opening/closing
positions.
Control system
-
S800 ENC must be connected to a FAAC electronic board for the
control of 230 V for swing gates, fitted with a BUS connection
and slowdown control at the limit switch.
Standard equipment
(on all versions)
-
BUS magnetic absolute encoder to detect slowdown and stroke
end positions and to recognise obstacles to movement (anti-
crushing electronic function).
-
By-pass screws to adjust the maximum crushing force during
opening and closing.
-
Service release lever: for manual operation during installation/
maintenance.
-
Integrated mechanical opening and closing stops (positive stop):
used to define the leaf stop points. No external mechanical
stops are required when using the positive stops. Using positive
stops will also reduce the maximum stroke (maximum reduc-
tion: 30° for opening and 30° for closing). The limits of use of the
positive stops in relation to the length and weight of the leaf are
described in detail in
2
.
FAAC Components required for installation:
-
foundation box
-
grooved joint kit
Optional FAAC accessories:
-
hydraulic release device with coded key accessible from inside as
well as outside the gate (required on CBAC versions)
-
lock with customised key for hydraulic release
5
Technical data
Model
Version
S800 ENC
100° CBAC 230V
S800 ENC
180° CBAC 230V
S800 ENC
100° SBW 230V
S800 ENC
180° SBW 230V
Mains power supply voltage
230 V~ 50 Hz
230 V~ 50 Hz
230 V~ 50 Hz
230 V~ 50 Hz
Electrical motor
Asynchronous single-phase
Asynchronous single-phase
Asynchronous single-phase
Asynchronous single-phase
Thrust capacitor
8 μF
8 μF
8 μF
8 μF
Thermal protection
120 °C
120 °C
120 °C
120 °C
Max power
280 W
280 W
280 W
280 W
Max torque
550 Nm
550 Nm
550 Nm
550 Nm
Max. leaf width
2 m
2 m
4 m
4 m
Max. leaf weight
800 kg
800 kg
800 kg
800 kg
Max angular speed
7.8 °/s
7.8 °/s
7.8 °/s
7.8 °/s
Max leaf opening angle
113 °
187 °
113 °
187 °
Operating ambient temperature
-20 °C +55 °C
-20 °C +55 °C
-20 °C +55 °C
-20 °C +55 °C
Type of use
Residential-Condominium
Residential-Condominium
Residential-Condominium
Residential-Condominium
Continuous operating time (ROT)
133' at 23 °C
133' at 23 °C
133' at 23 °C
133' at 23 °C
Protection rating
IP67
IP67
IP67
IP67
Type of oil
FAAC HP OIL
FAAC HP OIL
FAAC HP OIL
FAAC HP OIL
Dimensions (W x D x H)
(Foundation box)
380 x 220 x 160 mm
(507 x 283 x 200 mm)
450 x 220 x 160 mm
(507 x 283 x 200 mm)
380 x 220 x 160 mm
(507 x 283 x 200 mm)
450 x 220 x 160 mm
(507 x 283 x 200 mm)
Weight
(Foundation box)
16 kg
(18.3 kg)
16.5 kg
(18.3 kg)
16 kg
(18.3 kg)
16.5 kg
(18.3 kg)
Summary of Contents for S800 ENC
Page 1: ...S800 ENC...
Page 22: ...S800 ENC 20 532116 Rev A...
Page 23: ...S800 ENC 21 532116 Rev A...