1
August 2016 Issue 1 SGEX16
SeceuroGlide Classic &
SeceuroGlide Excel Installation Instructions
Always check
on delivery that the order details are correct and the
door is undamaged, especially
before removing any existing doors
.
Sequence of Installation & Contents
01.
Pre-Installation and Component Check
02.
Installation Options and Criteria for Compliance with LPS 1175
03.
Prepare the Opening
04.
Prepare the Guide Rails
05.
Fit End Plates, Axle Assembly, Guides (& optional fascia)
06.
Fitting Emergency Overrides
07.
Install the Curtain in the Guides, Attach to Axle & Fit Stops
08.
Curtain Locking & Setting Motor Limit Switches
09.
Curtain Adjustment (reducing height/making repairs)
10.
Installation of Box Supports
11.
Commissioning
12.
Technical Assistance
01. PRE-INSTALLATION AND COMPONENT CHECK
Check:
i.
Delivery note
ii.
Order sheet
iii.
Door dimensions / colour
iv.
Opening dimensions / clearances
v.
Components
vi.
Check for any damage to the guide rails
or the outside roll of the curtain
Do not proceed further with the
installation unless you are sure that
the door is the correct size, and all
components are present.
To
ta
l H
ei
gh
t
G
ro
un
d H
ei
gh
t
H
ea
dro
om
Drive Through Height
Drive Through Width
Over Guide Width
HEIGHTS
Order Height
= Guide Height
Total Height
= Guide End Plate
Headroom/End Plate
up to 2.5m Guide Height = 300mm
up to 3.5m Guide Height = 350mm
Drive Through Height
Guide Height less 55mm
WIDTHS
Order Width
= Over Guide Width
Drive Through Width
Over Guide Width less 150mm for 75mm guides
Over Guide Width less 180mm for 90mm guides
www.samsondoors.co.uk
0800 328 6250
www.samsondoors.co.uk