Wayne-Dalton ThermoMark 5150 Installation Instructions Download

Page: 1 / 4

Wayne Dalton, a division of Overhead

Door Corporation

P.O. Box 67, Mt. Hope, OH 44660

www.Wayne-Dalton.com

WINDLOAD POST

MODEL 5150/5200/8300/8500

INSTALLATION INSTRUCTIONS

Rev 2 05/03/2016

298473

See garage door owner’s manual for warranty information.

IMPORTANT NOTICE!

READ THE ENCLOSED INSTRUCTIONS CAREFULLY BEFORE INSTALLING THIS WIND LOAD POST. PAY

CLOSE ATTENTION TO ALL WARNING LABELS AND NOTES. THIS MANUAL SHOULD BE ATTACHED

TO THE WALL IN CLOSE PROXIMITY TO THE WIND LOAD POST.

Summary of Contents for ThermoMark 5150

Page 1: ...ght 2016 Wayne Dalton a division of Overhead Door Corporation Rev 2 05 03 2016 298473 See garage door owner s manual for warranty information IMPORTANT NOTICE READ THE ENCLOSED INSTRUCTIONS CAREFULLY...

Page 2: ...st assembly Step 4 Ensuring the post assembly is plumb trace the outline of the bottom of the outer post on the floor Remove the post assembly and set aside until step 5 Locate the center of the trace...

Page 3: ...1 5 16 12 x 1 self drilling screw and flat washer 1 4 above the strap on the garage side of the post and 1 4 below the strap on the door side of the post as shown Do not tighten the screws against th...

Page 4: ...lag screws into solid wood Masonry anchors may be substituted for mounting directly to masonry or concrete Provide wood blocking adequately secured to structure as required for other substrates Step...