background image

9

  

10

  

8

  

S800  ENC 

11 

532116        -  Rev.A

1

3

2

3

=

=

4

1

2

Tr

ansla

tion of the original instruc

tions

ENGLISH

5.4 SET UP THE GUIDE BRACKET

RISKS

PERSONAL PROTECTIVE EQUIPMENT

 

!

The guide bracket is an important component for installation safety, 
to guarantee the stability and control of the leaf during movement.
The guide bracket in the FAAC catalogue is designed for applications 
with leaves up to the maximum weight and length indicated in the 
Technical data.
When FAAC guide brackets are not used, the installer is responsible 
for designing the bracket suitable for the applied loads, defining the 
construction materials, thicknesses, sizes and surface anti-corrosion 
treatments. Play between the leaf and bracket must be MAX 2 mm.
The welds made must be certified.

1.  Set up the guide bracket (

8

-1

).

2.  Position the grooved joint (

8

-2

).

The notch on the joint must be centred with the centreline of the bracket 
and directed as shown in the figure.
When the bracket is placed on the box the joint must be centred on the 
vertical rotation axis of the leaf 

(

8

-

 3).

3.  Weld the entire circumference of the joint on the guide bracket 

(

8

-4

).

5.5  INSTALLING THE LEAF

RISKS

PERSONAL PROTECTIVE EQUIPMENT

1.  Assemble the bush (

9

-1

) in the foundation box, inserted in the 

reference pin (

9

-2

).

2.  Assemble the guide bracket (

9

-3

).

3.  Assemble the leaf on the guide bracket (

10

) and anchor the 

leaf to the upper hinge.

 

!

Play between the leaf and bracket must be MAX 2 mm.
DO NOT weld the guide bracket to the leaf.

4. Check that:

 

-

the leaf resting on the bracket is perfectly horizontal (use the 
spirit level)

 

-

movement is smooth and with no friction along the entire stroke, 
all the way to the external opening/closing stops (if present)

 

!

When moving it manually, slowly guide the leaf for its entire stroke, 
do not push the leaf so it moves freely. 

Summary of Contents for S800 ENC

























Reviews: