5)
Press P2 to teach leaf 2 closing deceleration starting point.
6)
Let the leaf 2 make contact with the
full closed stop point. Leaf 1 will begin closing.
7)
Press P2 to teach leaf 1 closing deceleration starting point.
8)
Let the leaf 1 make contact with the full closed stop point.
Press
P1
to exit the learning mode.
You may now test your gate opener or continue on with changes to the
factory speed, force, delay settings.
To test your opener, briefly touch a
wire from terminal 1 to one of the negative terminals (12, 13, 14, or
15).
$
Summary of Contents for Estate Swing
Page 1: ...Featuring ...
Page 34: ... ...