![background image](http://html1.mh-extra.com/html/faac/estate-swing/estate-swing_instruction-manual_535564008.webp)
•
Power Drill
•
Crescent Wrench
•
3/8” Drill Bit
•
Hacksaw
•
Flat Head Screwdriver
•
Phillips Head Screwdriver
•
Tape Measure
•
Level
•
Wire Strippers
•
C-clamps
Other items that may be needed prior to commencing installation.
•
Start and stop post, bracket or door stop. Although the FAAC Estate swing fea-
tures soft start/stop it is still necessary to have a closed stop post for 3 reasons:
1) During the learn mode the gate will need to make contact with a closed
stop point to learn its limits (open as well if doing 1 touch programming,
unnecessary if doing manual programming.)
2) A closed stop point is necessary for proper operation of your opener cycles
and stabilization of the closed position.
2) Having a start and stop point permanently in place may extend the life of
the operator by absorbing some of the momentum of the gate during open
and close cycles.
•
Additional low voltage wire may be required to run power to your operator.
Length is determined by distance between transformer power supply and the
control box.
•
If the gate is more than 1000’ from an a/c power supply then alternate power will
be necessary to charge your battery.
•
Depending on the dimensions of your post you may need longer carriage bolts.
•
A metal support bracket may be needed to achieve the appropriate 5”x 5” set-
back. The metal support bracket will be bolted or welded to your post to give a
larger amount of space to mount the provided mounting bracket.
Summary of Contents for Estate Swing
Page 1: ...Featuring ...
Page 34: ... ...