FAAC E124, Rapid Manual

Page: 8 / 24

7
ENGLISH
BASIC PROGRAMMING
Display Basic Function
cF
0 1 2 4 3 6 5
cF 0
Configures the parameters with DEFAULT values corresponding
to an installation with non-FAAC operators. (see column
cF
0).
1
Configures the parameters with DEFAULT values corresponding
to an installation with operators
FAAC 412, 413/415, 770, 390,
770N (see column
cF
1).
2
Configures the parameters with DEFAULT values corresponding
to an installation with operators
FAAC 391 (see column
cF
2).
3
Configures the parameters with DEFAULT values corresponding
to an installation with operators
FAAC S700H/S800H (see column
cF
3).
4
Configures the parameters with DEFAULT values corresponding
to an installation with operators
FAAC 418. (see column
cF
4).
5
Configures the parameters with DEFAULT values corresponding
to an installation with operators
FAAC S450H (see column
cF
5).
6
Configures the parameters with DEFAULT values corresponding
to an installation with operators
FAAC S800H ENC (see column
cF
6).
PC
Mixed configuration from a PC/MAC
At the time of changing the set motor type on the board,
the relevant defaults are uploaded.
0 1 2 4 3 6 5
dF
DEFAULT:
Y
indicates that all the set values correspond to the default values.
no
indicates that one or more set values are different from the de-
fault.
Set
Y
if you want to restore the default settings.
Y Y Y Y
LO
FUNCTION LOGICS:
E
Semi-automatic
EP
Semi-automatic Step-by-Step
S
Automatic Safety Devices
SA
Automatic with reversal during pause
SP
Automatic Step-by-Step Safety Devices
A1
Automatic 1
A
Automatic
AP
Automatic Step-by-Step
At
Automatic timer
b
Semi-automatic “b”
bC
Mixed ( Pulses for opening / Dead-man commands for closing)
C
Dead-man
CU
Logic modified from a PC/MAC
Other more detailed programming possibilities are feasible
by programming with a PC (see dedicated instructions).
E E E E