FAAC DAAB DB402, Instruction Manual

Page: 10 / 14

10
INSTRUCTION MANUAL DAAB VEHICLE DETECTOR DB402
Revision 7
No. Name Range Factory Setting
d160 Control function 0 - 1 0
0 Disabled
1 Open
d161 Type of control signal when activated 1 - 2 1
1 Pulse
2 Constant signal when loop is activated
d162 Half operation 1 - 3 3
1 Motor 1
2 Motor 2
3 Motors 1 and 2
d163 Limited opening 0 - 1 0
0 Disabled
1 Opening with limit switch according to set time in channel C412/C414 with EP104, L216/L226 with
EP105 or number of degrees in L116/L126 if encoder is used.
d170 Allows the opening function, via LOOP1, using a
programmable input.
0 - 6 0
0 Disabled, normal opening/closing function. (Programmable input has no function for LOOP1)
1 Opening possible only if there is a signal at programmable input 1
2 Opening possible only if there is a signal at programmable input 2
3 Opening possible only if there is a signal at programmable input 3
4 Opening possible only if there is a signal at programmable input 4
5 Opening possible only if there is a signal at programmable input 5
6 Opening possible only if there is a signal at programmable input 6
d175 Opening via loop after activation during set time, the loop
will not open the gate until it has been activated for the set
time.
0.0-9.9 seconds 0.0
d190 Interlock opening 0 - 1 0
0 Disabled
1 Sends a normal open signal to the remote door