TM2
X
W
12
A4518_6H02_Rev.A
MANUTENZIONE
CAMBIO BATTERIE
Per apportare modifiche alle soglie di intervento per l’allarme, per cambiare le
batterie o per fare qualsiasi altra operazione di programmazione, è necessario
sganciare il guscio dalla base di fissaggio. Per effettuare questa operazione senza
che il sensore rilevi un allarme e comandi la chiusura della tenda, con un possibile
pericolo per l’operatore, è necessario disabilitare il sensore (vedi paragrafo DISAT-
TIVAZIONE DEL SENSORE).
SELETTORE
1
9
2
3
45
8
7
6
0
DISATTIVAZIONE DEL SENSORE
Per disattivare il sensore seguire la seguente procedura:
- Aprire completamente la tenda, attendere che la barra terminale sia ferma per
almeno 10 secondi prima di iniziare a sganciare il sensore.
- Premere lateralmente su entrambi i ganci di fissaggio e contemporaneamente
tirare il guscio, finché si stacca dalla base di fissaggio. Per questa operazione, non
utilizzare attrezzi (cacciavite o simili).
- Non appena il guscio è sganciato, ruotare il selettore della sensibilità sulla posi-
zione 0: il led effettua 3 lampeggi lenti (0,5 s On - 0,5 s Off ), a conferma del fatto
che il sensore è disattivo e non può provocare allarmi.
Quando le batterie sono quasi scariche, il led lampeggia periodicamente ogni 2
secondi: in questo caso procedere alla sostituzione delle batterie.
Per la sostituzione delle batterie si può procedere con la disattivazione automatica:
- Rimuovere il guscio dalla base
- Orientarlo in posizione verticale per 3 secondi
- Il sensore si disattiva automaticamente.
3 sec
Dopo aver sostituito le batterie il sensore si riattiva in automatico ed è sufficiente
riagganciare il guscio alla base di fissaggio.
La durata delle batterie, in condizioni di normale utilizzo, è superiore ai due anni.
Si consiglia tuttavia di sostituire le batterie ad ogni inizio stagione.
Per riabilitare il sensore, seguire la procedura di attivazione.
IT
Summary of Contents for 145503
Page 1: ...TM2 XW ...