F5 ARX-2000, Hardware Installation Manual

Page: 53 / 80

LED Indicators
ARX-2000 Hardware Installation Guide 4 - 5
Table 4.3 describes the LED colors and patterns that occur during various
operational states, such as booting, diagnostics, and so on.
Ethernet Port Link Status LEDs
The Ethernet ports are located and labeled on the lower right front panel.
The Ethernet port LED labels are pointed out in the following figure.
Figure 4.2 Ethernet Port LED Labels
See the following table for details and status on the Ethernet LEDs.
Table 4.3 Alarm and Status LED Patterns and Operational States
Alarm LED Status LED Module State
Off Green Online
Red Green (blinking) In the process of booting.
Off Amber Online Partial. At least one processor is online,
but at least one processor is not online yet.
If the offline processor does not come online in
5 minutes, this status changes to Failed Partial.
Red Amber Failed Partial. At least one processor is online,
but at least one processor has failed.
Off Off No power.
Table 4.4 Ethernet Port Link Status LEDs
LED Status
LED in upper left
connector corner Link status:
• Steady amber indicates that the port is enabled
and a link established at 100mb.
• Steady green indicates that the port is enabled
and a link is established at 1000mb.
LED in upper right
connector corner Activity status. Flashing green indicates packet
traffic.