F5 ARX-2000, Hardware Installation Manual

Page: 46 / 80

Chapter 3
Connecting the Switch to the Network
3 - 18
SWITCH> enable
SWITCH# copy ftp://juser:jpasswd@ftp.wwmed.com/a2kconfig scripts running
SWITCH# show scripts
scripts
running Feb 12 17:45 2.1k
SWITCH# run scripts running
The running ‐ config script set up all local parameters, such as the hostname and the network
settings:
SWITCH#; ARX ‐ 2000
SWITCH#; Version 6.02.000.14293 (Dec 2 2011 20:04:01) [nbuilds]
SWITCH#; Database version: 602000.21
SWITCH#; Generated running ‐ config Thu Dec 8 03:10:49 2011
SWITCH#; System UUID 876616f6 ‐ 79ac ‐ 11d8 ‐ 946f ‐ 958fcb4e6e35
SWITCH#; ip private vlan internal 1008 metalog 1009 subnet 169.254.100.0 255.255.255.0
SWITCH#;
SWITCH#terminal
character ‐ set unicode ‐ utf ‐ 8
SWITCH#;================================= vlan ==================================
SWITCH#config
SWITCH#
vlan 74
SWITCH# description "personnel dept."
SWITCH# members 1/5 to 1/6
SWITCH#...
SWITCH#;================================
system =================================
SWITCH#config
SWITCH(cfg)#
clock timezone America New_York
SWITCH(cfg)# hostname prtlndA
prtlndA(cfg)# ip domain ‐ list wwmed.com
prtlndA(cfg)# ...
prtlndA(cfg)# exit
prtlndA#
If you copied the private subnet and mask from the defunct switch (recall
Matching the Private Subnet, on page 3-7 ), this completes the switch
replacement. Otherwise, the new switch learns its private subnet from its
peer, re-configures itself, and reboots. (A reboot is necessary to change the
private subnet of an ARX.)
See the ARX® CLI Network-Management Guide for detailed configuration
instructions.
Connecting the OOB Management Interface
After you boot the switch, you can connect the Ethernet out-of-band (OOB)
management interface to a management station or network. To locate the
management interface, see
Figure 3.1 . You can use this interface to access
the GUI (ARX Manager) or the CLI.