F.W. BELL 8000 Series Gauss/Tesla Meter Instruction Manual
Section 1 – Introduction
1-8
General
Description
(Continued)
Cabinet
The cabinet is equipped with a side handle and two feet underneath the
unit which serve to adjust the tilt angle of the instrument.
Figure 1-3 shows the instrument in various positions.
A rack mount option (part number 418001) is available for the 8000
Series Meters that allows the meter to be mounted in a 19” equipment
rack. Consult your FW Bell sales representative for more information.
Figure 1-3 Various Positions of Meter
Applications
•
Sorting or performing incoming inspection on permanent magnets,
particularly multi-pole magnets.
•
Testing audio speaker magnet assemblies, electric motor armatures
and stators, transformer lamination stacks, cut toroidal cores, coils
and solenoids.
•
Determining the location of stray fields around medical diagnostic
equipment.
•
Determining sources of electromagnetic interference.
•
Locating flaws in welded joints.
•
Inspection of ferrous materials.
•
3-dimensional field mapping.
•
Inspection of magnetic recording heads.
•
Designing new magnetic assemblies.
