F.W. BELL 8000 Series Gauss/Tesla Meter Instruction Manual
Section 1 – Introduction
1-5
General
Description
(Continued)
Remote Operation
Remote operation is supported through either a standard 9-pin “D” RS232 serial
port connector or standard RJ-45 Ethernet connector (10/100 MHz Ethernet
Port).
The 8000 meters can be remotely operated and flux density readings and
other information can be acquired by a remote computer or PLC. The
commands follow widely accepted protocols established by the SCPI-1999
standards.
In addition the 8000 Series Gaussmeters are supplied with an internal HTML
based remote monitoring and data logging application, that when connected to
a computer network can be accessed with standard web browser applications.
AC Waveform Display Mode
The graphical AC Waveform Display mode allows users to look at AC
measurements without the use of an external oscilloscope or other analog
graphing device. It provides operation and custom settings that will trigger on
user parameters and display the measurement on a familiar oscilloscope type
display.
Accessories
The instrument is shipped with a “zero flux chamber” used for shielding the
probe from unwanted fields during zeroing. In addition a sturdy carrying case is
provided for the zero flux chamber, probes, and other accessories or tools.
