F.W. Bell 7030, Instruction Manual

Page: 48 / 126

F.W. BELL Model 7030 Gauss/Tesla Meter Instruction Manual
5-10 Section 5 – User Interface
DISPLAY FORMAT
(Continued)
Changing the Display Orientation (Horizontal / Vertical)
The display orientation may be changed from the menu system or
from the front panel keypad.
Note: When only one channel is displayed, there is no difference
between the horizontal and vertical Setting.
To change the orientation from the menu system:
1) From the main menu, choose Display.
2) Position the “pointer” over the “selection” next to the word
“
Orientation”
.
3) Press the ENTER Key to switch the setting.
To change the orientation from the measurement screen:
1) Press and hold the ENTER key.
2) With the ENTER key held, press the up DIRECTION key.
Activating and Deactivating Channels
To activate / de-activate a channel or vector summation from the
menu system:
1) From the main menu, choose DISPLAY.
2) Position the “pointer” over the appropriate “checkbox” in the
row labeled “
Channel On
” and press the ENTER key.
To activate / de-activate a channel from the measurement screen:
1) Press and hold the ENTER key.
2) With the ENTER key held, press the right ADJUST key for
the channel that is to be enabled / disabled.
To activate / de-activate vector summation from the measurement
screen:
1) Press and hold the ENTER key.
2) With the ENTER key held, press the right DIRECTION key.